|
Features :
Real DIY Remote Surveillance Cameras (Model:ZP03) * Wired & Wireless IP Camera (selectable ) * True Remote operate at any corner of the world via interent. * Auto Movement Video Recorder: * Multi-IPcam Function: view more Wireless IPcams simultaneously * High speed PAN operation * PAN range 270 degrees, * Delivers Clear & Distinct Video * Suitable for home, shop, office, warehouse, kindergarten, hospital etc * Delivers Clear & Distinct Video
The main function:
1. Support UPNP agreement, automatically through gateways, hot-plug 2. Dynamic Domain Name Analysis 3. IE broser 4. Dynamic IP address assignment LAN Connection(in the picture ) Under such model, IP Camera can be connected to PC? by cable directly or Hub or Switch. IP addresses is usually? private IP (192.168.1 .*), the subnet mask is 255.255.255.0.
|
|
1. If you use first one mode, make sure you use twisted pair line is cross line, otherwise you will not be able to connect to your IP Camera normally; 2. In the second and third mode, there is no difference between Hub and Switch on function which can be exchanged.
|
Firstly installation software before manipulating IP camera
Start IP Camera on IP Camera Tool: Double-click IP cameras tools on the Desktop; "ip camera tool" Double-click IP address to enter into log in web. Please remember IP address
Start IP Camera on the internet
Input the IP address directly and click Enter, then enter into log in webpage.( IP address can be available by previous method). Note: the port number is 80
3.2 Extranet (Internet) to connect (in the picture ) When IP Camera and PC are not at the same network segment, the IP address can be available by correct connection.
Connection by ADSL (in the picture) When connection by ADSL (see photo below), the IP address is dynamic changed. Each connection ADSL IP Camera will get a temporary IP address which is different from previous one.
Under such circumstances, please fill or select the ADSL User, Password and Report ADSL IP by Mail.
Specifications:
|
Compression:
|
M-JPEG
|
|
Video Input
|
CMOS,1/4”
|
|
Resolution:
|
VGA 640x480 15fps / QVG320x240 30fps
|
|
Network Interface:
|
RJ-45/10-100 Base T, 802.11b/g
|
|
Networking Protocol:
|
TCP/IP DHCP SMTP,TP DDNS UPNP PPPoE
|
|
Alarm Control:
|
Output 1CH 5V DC 0.1A Input 1CH shut to trigger
|
|
Motion Detector:
|
YES
|
|
DDNS
|
YES
|
|
Upgrade
|
Firmware upgrade by Web
|
|
Detect Mode:
|
IE
|
|
Playback Mode:
|
Windows Media Player
|
|
Safety:
|
Password Setup
|
|
Minimum illumination:
|
2.0LuX550nm
|
|
White balance:
|
YES
|
|
Lens:
|
CS
|
|
Temperature Range:
|
0 - 50C°20% - 80%PH
|
|
Power
|
220V AC / 5V DC1A
|
|
Consumption:
|
3W
|
|
Size:
|
150mm×62mm×62mm
|
|
Weight:
|
0.6Kg
|
|
Operating system:
|
Windows 2000 or Windows XP; internet explorer 4.0 or 6.0 recommended
|
|
CPU
|
Pentium III above; 1GHz or above
|
|
Memory
|
256MB of RAM or above
|
|